Laboratory Extractor Arms for Dust and Fumes

NEX-D Extractor Arm
- Solution for EX dust
- Spring balanced maneuverability
- Externally supported arm
- 360-degree swivel
- Stainless Steel Hood
- Available with or without hood damper
- 900 CFM
- Available in 2m (7ft),3m(10ft),4m(13ft), 5m(16ft) lengths
Typical Applications:
- Food Industries
- Chemical industries
- Pharmaceutical
Often Compared to:
- AQC: Maxair FA‐HSS6‐10 (Stainless)

Original CR Extractor Arm
- Solution for corrosion resistant fume extraction needs
- Spring balanced maneuverability
- Internally supported arm
- 360 degree swivel
- Damper included in hood
- 600 CFM
- Available in 2m (7ft),3m(10ft),4m(13ft),
- 5m(16ft) lengths
Typical Application:
- Chemical industries
- Pharmaceutical
- Museums
- University Labs
Often Compared to:
‐ AQC: Maxair FA‐HSS6‐10 (Stainless)

ESD/EX – Electrostatic Dissipating Extractor Arm
ESD
Used for non‐aggressive dusts and fumes
Can be used for certain EX applications
32mm, 50mm, 75mm, 100mm diameters available
Typical applications:
Electronics Manufacturing/Repair
Other application where static electricity discharge is a concern
Material Construction:
Joints/Rings/locking rings/bearing swivel:
Polypropylene with glass fiber reinforcement, conductive
Tubes: Aluminium, anodized 10 μm
Internal Spring: Stainless Steel
Competitor Comparison:
‐ Alsident: System 50/75/100, AS
‐ Fumex: TERFU ESD

NEX-S Extractor Arm
- Solution for EX dust and gasses
- Spring balanced maneuverability
- Externally supported stainless steel construction arm
- 180-degree swivel
- Stainless Steel Hood
- Available with or without hood damper
- Up to 1000 CFM
- Available in 2m, 3m, 4m, 5m lengths
Typical Applications:
- Pharmaceutical
- Chemical Labs
- Museums
- Other explosive/flammable gas applications

Bench Top – FX Series Extractor Arm
Original
General purpose arm
Used for non‐aggressive dusts and fumes
32mm, 50mm, 75mm, 100mm diameters available
Typical Applications:
- High Schools
- Trade Schools
- Labs non‐aggressive dusts/fumes
Capable of up to 320 CFM in a 4” diameter arm
Material Construction
Polypropylene joints
Anodized aluminum tubes
Competitor Comparison:
‐ Alsident: System 50/75/100, AL
‐ Fumex: TERFU Standard
Extractor Arms Manufactured by:

More Fume Hoods In Stock:
Eliminates fumes by providing a single direction of air flow across the work surface