Isolator Bench Top Fume Hoods

Isolator Bench Top Fume Hoods  is the latest generation of energy saving high performance fume hoods, built upon extensive R&D. Utilizing computational fluid dynamics, ICI was able to develop a safe and superior operating environment without the need for additional components to add or inject air into the hood chamber. By controlling baffle pressurization,

Isolator bench top fume hoods achieves the proper capture and containment at a 60 FPM face velocity. Additionally, we do it with a sash opening of 24” (61 cm). JMP’s chemical exhaust fume hoods meet or exceed SEFA 1 standards.

  • 24” (61 cm) deep clear interior
  • Low static rectangular exhaust duct
  • Integral stainless steel 12” (30.5 cm) round duct transition
  • Slotted rear baffle for even plenum balance
  • Safe operation at 60 fpm
  • Chemically resistant white Poly glass liner
  • UL1805 listed, ANSI/ASHRAE 110-1995, UL1275
  • Three-year hood superstructure warranty
  • Chain & Sprocket sash mechanism with the exclusive ICI lifetime warranty
  • Exclusive standard 43 1/2” (110.5 cm) tall full view sash area
  • Tempered glass sash with full-length formed steel handle for a neat, clean appearance and streamline air passage
  • Color: Pearl White

4′, 5′ and 6′ Bench Fume Hoods ship in 6 days

Part Number with frame less vertical sash Overall Hood Width Sash Opening Area (Sq Ft) 24” (61 cm) Vertical Opening @ 60 FPM Face Velocity S.P. Loss 18” (45.7 cm) Vertical Opening @ 80 FPM Face Velocity S.P. Loss
F-350-48G5IN 4 ft. 6.3 380 CFM 0.21” 380 CFM 0.12”
F-350-60G5IN 5 ft. 8.3 500 CFM 0.20” 500 CFM 0.11”
F-350-72G5IN 6 ft. 10.3 620 CFM 0.31” 620 CFM 0.17”
F-350-96G5IN* 8 ft. 14.3 860 CFM 0.27" 860 CFM 0.15"

* This hood available for shipment in 7-8 weeks

INSTOCK Hood Features

  • Two pre-wired 120V 20amp GFCI duplex receptacles
  • One pre-wired 20amp light switch
  • Pre-wired vapor tight T8 fluorescent light fixture
  • Each hood side post and interior are punched and plugged to receive 5 service fixtures
  • Upper left side post is punched for optional fan switch
  • One pre-wired outlet on roof of hood for an optional alarm
  • Upper right-side post is punched for optional alarm
Isolator Bench Top Fume Hoods Diagram
Isolator BenchIsolator Bench Top Fume Hoods Top Fume Hoods 4 ft diagram

F-350-48G5IN

F-350-60G5IN

Isolator Bench Top Fume Hoods 6 ft diagram

F-350-72G5IN

Isolator Bench Top Fume Hoods 8 ft diagram

F-350-96G5IN

More Fume Hoods In Stock:

Swiveling arm extensions to eliminate static electricity and aggressive chemical fumes

Eliminates fumes by providing a single direction of air flow across the work surface

Talk to an expert!
801-970-1212